UNIVERSAL SILICONE COLORLESS - 100 ml
One-component silicone binder which in contact with atmospheric moisture creates an excellent, flexible and non-shrinkable filling mass. Withstands large temperature differences, UV radiation, hot water, oils and fats.
Color - colorless or white; Consistency - paste; Film formation time - approx. 20 minutes (at temperature +22°C to +23°C and air humidity 50% - 55%; Density - 0.95 - 1.0 kg/L (depending on the color); Joint type - permanently elastic, waterproof
door frames | windows | ceramic tiles, stoneware and clinker tiles
| sanitary ceramics | impregnated wood | surfaces made of
glass, porcelain, anodized aluminum, stainless steel,
enameled surfaces and other construction joinery elements
| filling joints and gaps
1. The substrate should be dry, clean and thoroughly cleaned of dust, dirt, grease, grease, rust and other contaminants that may impair adhesion. Surfaces in the immediate vicinity of the places to be filled The silicone sealant should be secured with masking tape.
2. Work at temperatures between +5 ºC and +40 ºC (temperature of the air, substrate, and sealed elements).
3. Cut off the tube outlet above the thread. Screw in a nozzle cut diagonally to the width of the gap to be filled. Squeeze the silicone out of the tube using a hand gun (squeezer).
4. Squeeze the silicone out of the cartridge evenly, introducing it into the joints with a slight excess, continuously, leaving no gaps or empty spaces. The silicone surface should be shaped and finally smoothed within approximately 10-15 minutes using a spatula or other tool soaked in water.
with a small amount of soap or dishwashing liquid.
5. Clean dirty tools with DRAGON "Modified White Spirit". Dried silicone can only be removed mechanically.
of Dragon products
Capacity: for a 4x4 joint - 17 m/280 ml depending on the joint size.
Color: nan
Size: 100 ml
Reembolso por não entrega
