Sikaflex-291i black 300 ml is a one-component, non-sagging polyurethane sealant designed for marine applications.
Advantages and unique features
• Wheelmark mark and compliance with IMO requirements
• One-component formula - ready to use
• Non-sag - does not run off vertical surfaces
• High flexibility (elongation up to 700%)
• Very low VOC and solvent-free
Properties and applications
• Chemical base: one-component polyurethane
• Color: black
• Density (uncured): 1.3 kg/l
• Application temperature range: 10 – 40 °C
• Skin formation time: 60 min (23 °C / 50 % RH)
• Open time: 45 min (23 °C / 50 % RH)
• Shrinkage: 2 %
• Shore A hardness: 40
• Tensile strength: 1.8 MPa
• Elongation at break: 700 %
• Tear propagation resistance: 7 N/mm
• Operating temperature: –50 °C to +90 °C (24 h), briefly up to +120 °C / +140 °C
• Applications: sealing and bonding of marine structures – wood, metals, primers, coatings, ceramics, GRP
Parameter | Value
Cartridge capacity | 300 ml
Base | One-component polyurethane
Density | 1.3 kg/l
Skin formation time | 60 min (23 °C / 50 % RH)
Open time | 45 min (23 °C / 50 % RH)
Shrinkage | 2 %
Shore A hardness | 40
Tensile strength | 1.8 MPa
Elongation at break | 700 %
Usage temperature range | –50 °C to +90 °C (24 h), briefly up to +120 °C / +140 °C
Shelf life | 12 months (stored < 25 °C)
Instructions for use
1. Surfaces must be clean, dry and free of grease and dust.
2. Shake the cartridge before use and attach it to the gun (manual, pneumatic or electric).
3. Apply at a temperature of 10 – 40 °C, optimally 15 – 25 °C, avoiding air entrapment.
4. Smoothing Apply before the skinning time has elapsed using Sika Tooling Agent N.
5. Remove uncured material with Sika Remover-208; hardened material can be removed mechanically.
6. To clean tools and skin, use Sika Cleaner-350H and water—do not use solvents on skin.
Store in the original, closed container in a dry place at temperatures between +5 °C and +25 °C, away from UV radiation and frost.
Color: nan
Size: 300ml