Features:
1. Can be used for
jewelry carving as well as manicure machine.
2. Light weight
design for precise operation.
3. No load speed up
to 3000 20000 RPM, high efficiency.
4. Suitable for
engraving, drilling, carving, grinding, sharpening, sanding, polishing, and
more.
5. Come with
complete accessories and guidance instruction, practical and convenience.
Specifications:
Condition: 100percent
Brand New
Material: ABS,
stainless steel
Color: As Pictures
Show
Input Voltage:
100 240V
Plug: US
Power supply output:
12V, 500MA
No load speed:
3000 20000 RPM
Chuck: 2.4
Host size: Approx. 160
* 24mm 6.3 * 0.9in
Instructions:
1. This product can
be used for grinding (coarse grinding, fine grinding, fine grinding), carving,
polishing, polishing, drilling and other occasions (need to purchase
corresponding grinding head or drill bits and other accessories).
2. Remove the power
plug before installing the grinding head.
3. Hold the host to
the circular metal button, will grind the main axle of rotation on the lock,
and then loosen the host front nut, choose the grinding head you need, inserted
it into the host at the top of the nut hole, continue to hold the round metal
buttons, tighten the host at the top of the nut, the grinding machine is fixed
on the grinding machine spindle.
4. Connect the
power adapter to the grinding machine, plug in the ac power supply, push the
switch, adjust the rotation speed of the host machine, and slowly bring the
grinding head close to the grinding object to polish the desired shape
according to the need.
5. After use,
please pull out the power plug and properly keep the sander.
Safety tips:
1. When replacing
the chuck or other accessories, be sure to remove the power plug.
2. Do not press the
spindle lock button when the grinding machine is rotating.
3. Do not use the
product in the water or near the water source. If the sander falls into the
water accidentally, do not touch the water body and pull the power plug
immediately.
4. After using this
product, do not touch the grinding head or chuck with your hands, because the
large grinding head or chuck may cause high temperature of the product due to
friction.
5. Please use
protective eye mask and respirator to prevent dust from entering your eyes and
lungs.
6. When this
product is not applicable, please be sure to pull the power plug.
7. After use,
please store it in a dry place. Keep it out of reach of children.
Package List:
1 * Grinding machine
8 * Carving Board
1 * Marking pen
30 * Grinding needle
6 * Sandpaper circles
6 * Grinding head
1 * Adapter plug
1 * Manual
