Feature:
1. FULL FUNCTIONING: This meter is an intelligent True RMS auto range high accuracy digital multimeter with intelligent and professional measurement functions. Complete functions with gear and analog bar display.
2. AUTOMATIC IDENTIFICATION: After starting, the measurement will automatically identify the object to be measured, and realize the intelligent anti burning of voltage, which is suitable for professionals and novices.
3. SUPPORT NCV FUNCTION: NCV non contact voltage detection and insulation test are safer. It is both multimeter and test pen, and the single test is inserted into the socket to judge the neutral wire and live wire.
4. WIDE RANGE OF APPLICATION: 4000 counts voltage resistance tester is suitable for household circuit detection, industrial circuit detection, office circuit detection, outdoor operation circuit detection, etc.
5. SMART MEASUREMENT MODE: This measurement mode is defaulted at power on. In this mode, you can measure DC voltage, AC voltage, resistance, on off, and the meter automatically recognizes the measurement signal.
Specification:
Item Type: Digital Multimeter
Model: HT124B
Material: ABS
Battery: 2 x 1.5V AAA Battery (Battery Not Included)
Application: Home circuit testing, industrial circuit testing, office circuit testing, outdoor work circuit testing
Support Language: English
Basic Parameters:
1. General Indicators:
Environmental Conditions for Use: CAT.III 600V
Pollution Degree: 2
Altitude <2000m
Working Temperature and Humidity: 0~40 celsius (<80percent RH, <10 celsius Non Condensing)
Storage Temperature and Humidity: 10~60 celsius (<70percent RH, Remove Battery)
Temperature Coefficient: 0.1x Accuracy celsius (<18 celsius or >28 celsius )
Display: 4000 Counts, updated about 3 times per second
Over Range Indication: Display OL
2. Precise Indicators:
DC Voltage
400mV
0.1mV
+(0.5percent +3)
4V
0.001V
40V
0.01V
400V
0.1V
600V
1V
AC Voltage
4V
0.001V
+(0.8percent +3)
40V
0.01V
400V
0.1V
600V
1V
Resistance
400 Ohm
0.1 Ohm
+(1.0percent +5)
4K Ohm
0.001K Ohm
40K Ohm
0.01K Ohm
400K Ohm
0.1K Ohm
4M Ohm
0.001M Ohm
40K Ohm
0.01M Ohm
+(1.5percent +10)
Capacitance
4nF
0.001nF
+(4.0percent +5)
40nF
0.01nF
400nF
0.1nF
4microfarad
0.001microfarad
40microfarad
0.01microfarad
400microfarad
0.1microfarad
4mF
0.001mF
Frequency
4Hz
0.001Hz
+(0.5percent +3)
40Hz
0.01Hz
400Hz
0.1Hz
4KHz
0.001KHz
40KHz
0.01KHz
400KHz
0.1KHz
4MHz
0.001MHz
.
Package List:
1 x Digital Multimeter (Battery Not Included)2 x Test 1 x Manual
Note:
1. Please be especially careful when measuring over 60VDC 30VAC RMS or 42V peak value. This type of voltage has the risk of electric shock.2. Do not measure the voltage higher than the rated value between the terminals or between the terminals and the ground.3. Check whether the meter is working normally by measuring the known voltage. If it is abnormal or damaged, please do not use it again.4. Before using the meter, please check whether there are cracks or damage to the plastic parts of the meter casing, if any, please do not use it again.5. Before using the meter, please check whether the test s are cracked or damaged. If so, please replace the test s of the same model and the same electrical specifications.6. Please use the meter according to the measurement category, voltage or current rating specified on the meter or manual.FULL FUNCTIONING: This meter is an intelligent True RMS auto range high accuracy digital multimeter with intelligent and professional measurement functions. Complete functions with gear and analog bar display.
AUTOMATIC IDENTIFICATION: After starting, the measurement will automatically identify the object to be measured, and realize the intelligent anti burning of voltage, which is suitable for professionals and novices.
SUPPORT NCV FUNCTION: NCV non contact voltage detection and insulation test are safer. It is both multimeter and test pen, and the single test is inserted into the socket to judge the neutral wire and live wire.
WIDE RANGE OF APPLICATION: 4000 counts voltage resistance tester is suitable for household circuit detection, industrial circuit detection, office circuit detection, outdoor operation circuit detection, etc.
SMART MEASUREMENT MODE: This measurement mode is defaulted at power on. In this mode, you can measure DC voltage, AC voltage, resistance, on off, and the meter automatically recognizes the measurement signal.
