★[Cut Line Included] These motorcycle fog lights have a cut line. When installed normally, the top will emit yellow light and the bottom will emit white light. However, depending on the combination of the bracket and light and how the light is attached to the motorcycle, the top may be white and the bottom may be yellow. Please check the orientation you prefer before installation.
★ [Mode Switching] Yellow steady, yellow and white half-steady, white steady, and yellow strobe. This motorcycle fog light LED cut line has a total of four lighting modes. It uses a two-wire connection (red and black), and you can switch lighting modes by turning the power switch on and off even at intervals of less than one second. Therefore, we do not recommend wiring everything together. We recommend installing it with an on/off switch in the circuit so you can freely switch lighting modes.
★[Multi-Angle Mounting] The small included bracket for the motorcycle LED fog lamp features three M8 screw holes. It can be mounted upright or suspended. Note: There are cut lines, so be careful when mounting at 45 or 90 degrees.
★[High performance] The motorcycle headlight auxiliary light is small and energy-saving, has a sturdy alloy body, heat dissipation pins distributed 360 degrees, rust-proof metal fittings, and is waterproof from around the lens to the base of the wiring, ensuring long-term use in many ways.
★[Wide range of applications] Compatible with DC12V24V, it can be used in a variety of situations such as motorcycle fog lights, motorcycle headlight auxiliary lights, bicycle modifications, electric motorcycle fog lights, etc.
Product details
Aoling Motorcycle Fog Lights, Motorcycle Fog Lights with Cut Lines, Small LED Fog Lights, Yellow/White, Steady-On, Strobe, 2-Wire Spot, Motorcycle Headlight Auxiliary Light, Fog Light
Material: Alloy + LED
Input voltage: DC12V-24V
Body color: Black
Light color: Yellow + white
Lighting modes: Yellow steady, Yellow & White half steady, White steady, Yellow strobe
Light beam: Spot
Wiring method: Red wire + Black wire -
Mounting screw diameter: M8
Product Features
★[Cut Line] Motorcycle fog lights have a cut line. When installed normally, the top will emit yellow light and the bottom will emit white light, but depending on the combination of the bracket and light and how the light is installed on the motorcycle, the top may be white and the bottom may be yellow.
★【Mode Switching】This motorcycle fog lamp LED cut line has four lighting modes: steady yellow, half steady yellow and white, steady white, and yellow strobe. It uses a two-wire connection (red and black), and you can change lighting modes in less than one second by turning the power switch on and off.
★[Multi-Angle Mounting] The small included bracket for the motorcycle LED fog lamp has three M8 screw holes. It can be mounted upright or suspended.
★[High performance] The motorcycle headlight auxiliary light is small and energy-saving, has a sturdy alloy body, heat dissipation pins distributed 360 degrees, rust-proof metal fittings, and is waterproof from around the lens to the base of the wiring, ensuring long-term use in many ways.
★[Wide range of applications] Compatible with DC12V24V, it can be used in a variety of situations such as motorcycle fog lights, motorcycle headlight auxiliary lights, bicycle modifications, electric motorcycle fog lights, motorcycle sub-lights, etc.
Note
1. There are cut lines on the motorcycle fog lights, so please check the direction you prefer before installation. Also, be careful when installing them at 45 degrees or 90 degrees.
2. As the lighting mode is switched by turning the power on and off, we do not recommend wiring it all together. We recommend installing it so that you can freely switch the lighting mode by adding an on/off switch to the circuit.
3. This is a beginner's waterproofing project, but considering the service life, it is recommended to add waterproofing measures to any gaps such as around the lens and where the wiring originates.
