Hioki Probe Current Measurement Load Sensor Probe 9010-50 Clamp-on

【Voltage Compatibility】 When using electrical appliances, please note that they are designed for Japanese voltage specifications (90-110V), so if you use them with a different voltage, it may cause a malfunction. 【Plug Type】 Our products use Japanese plug types (A or B type). Please use a conversion adapter if necessary. 【Important Note on Transformers and Adapters】 A transformer adjusts voltage to match your device’s requirements. A conversion adapter only changes the plug shape and does not adjust voltage. Using only a conversion adapter without a transformer may result in damage to the product. 【Liability】 We are not responsible for malfunctions or damages caused by improper use, such as operating the product without a transformer. [Rated current] AC 10 to 500 A, 6 ranges Accuracy: ±2% rdg. ±1% f.s. (45-66 Hz) [Frequency characteristics] Accuracy is added at 40 to 1 kHz, Amplitude: ±6 % rdg. (10, 20 A), ±3 % rdg. (50 A range or higher) [Output voltage rate] AC 0.2 V f.s. *f.s. is the set range value. The output of this device is the voltage of the AC raw waveform. Connect to a device with an input impedance of 1 MΩ or more. Maximum input current: 150 Arms continuous (10/20/50 A range), 400 Arms continuous (100/200 A range), 650 Arms continuous (500 A range) *Within derating of 40 to 100 Hz: 100%, 100 to 1 kHz: 50% [Maximum rated voltage to ground] AC 600V rms (50/60 Hz, CAT III) [Measurable conductor diameter] φ 46 mm or less [Dimensions and weight] 78W x 188H x 35D mm, 420 g, cord length 3 m